Water saw with sliding cutting head – disc Ø 350
Applications
C350 POWER - High power saw, for cutting stone materials, bricks and stone. It is the
ideal machine for both the construction site and the installer. It allows the installer
to cut tiles up to 1200 mm in length with disc entry from above,
while on the construction site the machine can be used to cut in two
passes blocks up to 250 mm high. Allows 45° cutting
without the aid of tools or optional accessories, but simply by tilting the
impact cutting head.
Standard Equipment
✓ Single-phase electric motor 230V/50Hz, 2.5kW
✓ IP55 switch with minimum voltage coil
✓ IP67 plug
✓ Laser pointer
✓ Disc Ø 350 mm for bricks/bricks/cement - sectors
✓ Large goniometer
✓ Stainless steel cutting surface
✓ Shockproof plastic tank for water containment and recovery
✓ Handles and wheels for manual movement and unloading
✓ Foldable legs
Recommended Discs
✓ Disc Ø 350 mm for ceramics - continuous crown
✓ Disc Ø 350 mm SUPER for porcelain stoneware - continuous crown
✓ Disc Ø 350 mm for bricks/bricks/cement - sectors
✓ Disc Ø 350 mm for granite/stone - sectors - s. laser
High cutting quality:
• The disc does not lose alignment with use,
thanks to three registration points: trolley,
arms, fixed stop;
• An easily operated selector allows
to set the desired cutting height;
• Cutting head locking system
at 90° and 45° for greater stability and
cutting precision;
• High cutting depth: max 250 mm.
Ergonomics and ease of use:
• Sound-absorbing panel inside
of the disc casing to minimize noise;
• Easily removable disc casing
by means of two “unlosable” type knobs;
• Quick replacement of the cutting disc with locking system on the crankshaft;
• Quick release water supply connection;
• Transportable by one person.
Robustness and durability:
• Sliding guide in extruded aluminium alloy of particular
profile (does not require lubrication and guarantees high
resistance to load or torsional deformations);
• 1390 x 696 mm cutting surface in stainless steel;
• Shockproof and wear-resistant plastic container for containment and
water recovery with decantation septa;
• Submersible pump protected against debris;
• Generously sized bath plug.
Safe working and handling:
• Quick trolley lock;
• Folding legs with opening/closing
snap;
• Transport handles and wheels
Maximum efficiency:
• Special engine with power and torque
40% higher than machines
similar ones on the market;
• Full power transmission
disc motor, via POLY-V belt
high resistance, which does not require
registration/maintenance.
C350 POWER
Disc diameter/hole ø mm 350/25.4
Max. cutting length (with top entry) mm 1050 (1200)
Max. cutting depth in 1/2 passes mm 120/250
Cutting table size mm 1390x696
Worktop height mm 785
Electric motor power 230V/50Hz kW 2.5
Engine speed rpm 2800
Absorption 230V/50Hz A 13.5
Water recovery tank capacity 40 l
Machine dimensions width/length/height with head lowered (head raised) mm 760/1746/1410(1535)
Packaging dimensions W/L/H mm 746/1770/1080
Machine weight (packed) mm 113 (133)
Comentários